Can be used for the transmission of forces and movements in highly stressed hydrostatic and oil-hydraulic systems where high stresses occur and corrosion is to be expected due to water ingress.
- high corrosion protection
- resistant to ageing
- improved behaviour in the mixing area
ISO VG 22; 32
Can be used to lubricate high-speed motorised and electric saws for woodworking.
- Specially selected base oils
- good behaviour in the area of mixed friction
- shear stable
- good lubrication
ISO VG 220; 320; 460
Can be used for the lubrication of high-speed motorised and electric saws for woodworking.
- specially selected base oils
- good behaviour in the area of mixed friction
- shear-stable adhesion
- good lubrication
Versatile and designed for a wide range of applications. It is used as a sliding and rolling bearing grease at grease lubrication points in motor vehicles, lorries, industrial machinery, conveyor systems, construction machinery, etc.
- Excellent flexing stability
- Rust and corrosion protection
KL3K (NLGI 3)
Universally applicable as a long-term lubricating grease. It is recommended for the lubrication of motor vehicles, industrial machinery and for all machines and equipment in the construction, stone and earth sector.
- water-resistant
- adhesive
- pressure-resistant
- corrosion protection
- high flexing stability
- high wear values
Universally applicable as a long-term lubricating grease. Recommended for the lubrication of motor vehicles, industrial machinery and for all machines and equipment in the construction, stone and earth sectors, for highly loaded plain and roller bearings. It is also especially recommended wherever high bearing temperatures occur.
- Good corrosion protection
- high load-bearing capacity
- good adhesion
- water-resistant
- oxidation-stable
Can be used for long-term lubrication of motor vehicles, industrial, construction and agricultural machinery, prevents fretting corrosion in bearings and sliding points under conditions of load, moisture and vibration. The product can be used over a wide temperature range.
- water-resistant
- flex stability
- adhesive
- pressure-absorbent
- corrosion protection
Can be used as a lubricating grease for universal use, in industry and in the automotive sector. The grease is suitable for most applications. It is used as a sliding and rolling bearing grease at grease lubrication points.
- Flex stability
- Wear protection
- Corrosion protection
Can be used for the lubrication of bearings subject to extreme pressure and shock loads, with relatively slow sliding movements.
- Friction-reducing properties
- Emergency running properties
- High compressive load
Can be used for the lubrication of bearings subject to extreme pressure and shock loads, with relatively slow sliding movements.
- Friction-reducing properties
- Emergency running properties
- High compressive load
EP-M 1 (NLGI 1)
Can also be used to lubricate open lubrication points in the visible area on guide rails, plastic sliding plates on telescopic cranes as well as on sliding roofs and slide rails in the heavy to medium load range. It has also proved its worth as external protection for wire ropes.
- High pressure absorption capacity
- Adhesion
- Corrosion protection
- Fulling resistance
- Emergency running properties
Can be used for the lubrication of highly pressurised rolling and plain bearings at high bearing temperatures and high external temperature and moisture loads. The product has proven itself not only in foundries and continuous casting plants, but also when used in mobile and stationary centralised lubrication systems
- Walk-stable
- oxidation-resistant
- water-resistant
- good corrosion properties
- high thermal resistance
- high pressure absorption capacity
- good adhesion
Lincoln Series 200 and QLS progressive distributors
Can be used for the lubrication of highly loaded roller and plain bearings at increased bearing temperatures. It is particularly recommended for the lubrication of wheel bearings in commercial vehicles and for high-speed car wheel bearings.
- High thermal load capacity
- Resistant to walking
- Resistant to oxidation
- Water-resistant
- Good corrosion properties
- High pressure absorption capacity
- Good adhesion
MAN 284 Li-H 2; MB 265.1
LC 003 (NLGI 3)
Can be used in rolling bearings subject to high loads and particularly high thermal loads, especially where lifetime lubrication is required.
- Ageing-resistant
- corrosion protection
- wear-inhibiting
- compatible with plastics
- long relubrication intervals
- free from heavy metals
Can be used for the lubrication of roller bearings, electric motors and machine tools, as well as in wheel hubs of cars, lorries, etc.
Corrosion protection
- Ageing resistance
- Wear protection
- Adhesion
MB 267.0; MAN 283 Li-P 3
L 221 (NLGI 1); L 223 (NLGI 3)
Can be used in open and closed gearboxes. Particularly suitable for geared motors, drum motors, small gears on household machines, angle grinders and drills.
- stable
- adhesive
- high pressure additives
- pressure absorbing
- wear resistance
- corrosion protection
GLP 0 F (NLGI 0)
Can be used at all lubrication points that are supplied by centralised lubrication systems for commercial vehicles.
- Rust and oxidation protection
- adhesive
- pressure-absorbent
MB 264.0; MAN 283 Li-P 00/000; VOGEL/SKF Lubrication Systems
GLP 0 KHT (NLGI 0)
Universally applicable in various industrial applications. The grease is tried and tested in many applications with centralised lubrication systems and gearbox applications.
- Rust and oxidation protection
- Adhesion
- Wear protection
- Pressure-absorbent
Applications include the lubrication of highly loaded plain and roller bearings in construction, earthmoving, commercial vehicles and mining machinery. Developed for demanding industrial applications in challenging environments, it offers protection against wear under heavy loads, high temperatures and in wet environments.
- water-resistant
- flex stability
- adhesive
- pressure-absorbent
- corrosion protection
Wherever there is a risk of hydraulic fluids leaking into the groundwater or wastewater. This includes technical equipment operating in water purification and water protection areas or in the vicinity of surface waters.
- Readily biodegradable
- Zinc-free additive combination
- Resistant to low temperatures
- Oxidation stability
- Corrosion and EP protection
US EPA VGP:2013, SP Technical Research Institute, Sweden (Swedish Standard 15 54 34)
ISO VG 15; 22; 32; 68
Wherever there is a risk of hydraulic fluids leaking into the groundwater or wastewater. This includes technical equipment operating in water purification and water protection areas or in the vicinity of surface waters.
- readily biodegradable
- high-performance and environmentally friendly additive combination
- resistant to low temperatures
- corrosion and EP protection
- high temperature oxidation stability
German Armed Forces / NATO: TL 9150-0083; SP Technical Research Institute, Sweden (Swedish Standard 155434)
ISO VG 22; 32; 68
Wherever there is a risk of hydraulic fluids leaking into the groundwater or wastewater. This includes technical equipment operating in water purification and water protection areas or in the vicinity of surface waters.
- readily biodegradable
- high-performance and environmentally friendly additive combination
- resistant to low temperatures
- corrosion and EP protection
- high temperature oxidation stability
ISO VG 32; 68
Use in high fire hazard areas. It is also recommended for use in areas with increased environmental hazards
, for example steelworks, forges, mining areas -> underground mining.
- readily biodegradable
- high-performance and environmentally friendly additive combination
- resistant to low temperatures
- corrosion and EP protection
- high-temperature oxidation stability
- anhydrous
- flame retardant
FM - Factory Mutual
Used to lubricate high-speed motorised and electric saws for all types of wood. It is particularly suitable for the lubrication of slideways and chain pulling devices during timber transport. Due to its excellent lubricating properties and adhesion, the oil remains in the intended place and thus leads to a reduction in friction and wear.
- 100% made from renewable raw materials
- completely biodegradable
Can be used in sawmills for the lubrication of saw frames. Due to various designs,
certain viscosities are prescribed, which are fully covered by us.
- Very good adhesion
- Optimum lubricating properties
- Easy to use
- Easily biodegradable
ISO VG 220
Used to lubricate cross-cut saws on harvesters. These saws have twice the peripheral speed of chainsaws, which means that low-viscosity saw chain adhesive oils are thrown off quickly, resulting in increased wear between the chain and bar.
- Completely and rapidly biodegradable
- Toxicologically harmless
- No lasting impact on surface and groundwater
Can be used universally as a long-life grease, especially at lubrication points that place a heavy burden on the environment. This occurs at nipple lubrication points and open lubrication points. The grease is used in the construction industry, on locks, bridges, signal boxes and other water-related applications. Can be used on harvesters, crawler excavators, caterpillars and low-loaders.
- Biodegradable
- very good adhesion
- excellent corrosion protection behaviour
- good water resistance
US EPA VGP:2013
LZR 1 (NLGI 1)
High-performance long-life multi-purpose grease. Suitable for all lubrication points on mobile and stationary systems in sensitive areas where ground contact or contact with water cannot be avoided.
- biodegradable
- non-toxic
- strong adhesion to metal surfaces
- high corrosion and wear protection
- application temperature up to 140°C
US EPA VGP:2013
320-0 G (NLGI 0)
Suitable for the lubrication of rolling and plain bearings, even in areas where release cannot be avoided.
- Biodegradable
- good corrosion protection
- suitable for low temperatures
- low coefficient of friction
GE 1 (NLGI 1); GE 0 (NLGI 0); GE 00 (NLGI 00)
Can be used in environmentally sensitive areas for the lubrication of chains, drive chains and saw chains of stone saws.
- Biodegradable
- good adhesion
- water-repellent
- anti-corrosive
Lithium; synthetic esters; NLGI 00, ISO-L-X-DCEB00
Can be used for insertion tools and wear bushes of hydraulic and pneumatic hammers and where the lubricant can get into the environment. The solid lubricants achieve a high load-bearing capacity and separation performance. When used regularly, our grease provides optimum protection for wear points.
- Rapidly biodegradable
- high pressure absorption capacity
- good release effect
- good corrosion protection
- good water resistance
Lithium; synthetic esters; NLGI 3; KPFE 3 K-30; ISO L-X-CCEB3
Can be used in harvesters, especially for lubricating the chain of the cross-cut saw, whereby the lubricant is fed to the chain via a central lubrication system. It can be used both in summer and winter. It is recommended at lubrication points where used grease is released into the environment via nipple lubrication, e.g. in forestry and forestry equipment, construction industries, locks, bridges, etc.
- Biodegradable
- favourable corrosion protection values
- good water resistance
- strong adhesion
- good lubricating properties
Lithium; synthetic esters
SP Technical Research Institute, Sweden (Swedish standard 155470)
Can be used in sensitive environmental areas where contact with water and soil cannot be avoided and at all lubrication points of mobile and stationary systems. The grease is particularly suitable for use on construction machinery that is used in demanding conditions.
- biodegradable
- non-toxic
- strong adhesion
- carbon dioxide purified from industrial waste gases used for production
Calcium sulphonate complex; synthetic esters; NLGI 2
Can be used in insertion tools and wear bushes of hydraulic and pneumatic hammers. Regular use provides optimum protection for wear points. The grease is particularly recommended where mobile systems are lubricated and the lubricant can get into the environment.
- Biodegradable
- high pressure absorption capacity
- separating effect
- corrosion protection
- water-resistant
KAJO GmbH develops high-performance lubricants specifically tailored to the demands of the forestry industry. From chainsaws and harvesters to forestry tractors – KAJO products ensure reliable lubrication, excellent wear protection, and optimal performance even under harsh environmental conditions. A strong focus is placed on biodegradable lubricants that meet strict environmental regulations in sensitive woodland ecosystems. With innovative solutions that combine technology and sustainability, KAJO is a trusted partner for professional applications in modern forestry equipment.
