Can be used for the transmission of forces and movements in highly stressed hydrostatic and oil-hydraulic systems where high stresses occur and corrosion is to be expected due to water ingress.
- high corrosion protection
- resistant to ageing
- improved behaviour in the mixing area
ISO VG 22; 32
Can be used to lubricate high-speed motorised and electric saws for woodworking.
- Specially selected base oils
- good behaviour in the area of mixed friction
- shear stable
- good lubrication
ISO VG 220; 320; 460
Can be used for universal to difficult machining operations on steel and stainless steel.
- high stability
- excellent cooling
- and lubricating properties
- resistant to microorganisms
- good skin compatibility
- pleasant odour
- long emulsion life
- good EP refinement
- chlorine- and nitrite-free
Can be used for cutting threads on pipes that do not come into contact with drinking water. The material surfaces achieved in this cutting process are of high quality. The oil is used undiluted.
- Increased pressure absorption capacity
- improved corrosion protection
- improved ageing
- free from chlorine
- no problems with disposal
Can be used for installation purposes where threads are cut on drinking water pipes and other water consumption systems. The oil should be used undiluted.
- water-soluble
- made from special polar additives
- made from selected polyglycols
DVGW - No. DW-0201AT2541
Can be used as temporary corrosion protection and for intermediate preservation of metallic surfaces. Also recommended for the preservation of small parts, tools and large areas of sheet metal, steel beams etc., but can also be used as additional corrosion protection in cutting oils and hydraulic oils when decommissioning the device.
- Corrosion protection for ferrous and non-ferrous metals
- water-displacing effect
- good lubricating effect
- protection against hand perspiration corrosion
- removable with solvents and aqueous cleaners
- silicone-free
Can be used to protect corrosion-sensitive metal surfaces, especially in cases where the metal is frequently exposed to condensation. Water is emulsified without any problems.
- Very good corrosion protection
- good creeping and wetting properties
- high water binding
- sprayable
Can be used, for example, in the production of fair-faced concrete with absorbent and non-absorbent formwork, for all types of wooden formwork, for raw boards or for heavily profiled formwork surfaces.
- excellent release properties
- high adhesion
- thin release film
Versatile and designed for a wide range of applications. It is used as a sliding and rolling bearing grease at grease lubrication points in motor vehicles, lorries, industrial machinery, conveyor systems, construction machinery, etc.
- Excellent flexing stability
- Rust and corrosion protection
KL3K (NLGI 3)
Universally applicable as a long-term lubricating grease. It is recommended for the lubrication of motor vehicles, industrial machinery and for all machines and equipment in the construction, stone and earth sector.
- water-resistant
- adhesive
- pressure-resistant
- corrosion protection
- high flexing stability
- high wear values
Universally applicable as a long-term lubricating grease. Recommended for the lubrication of motor vehicles, industrial machinery and for all machines and equipment in the construction, stone and earth sectors, for highly loaded plain and roller bearings. It is also especially recommended wherever high bearing temperatures occur.
- Good corrosion protection
- high load-bearing capacity
- good adhesion
- water-resistant
- oxidation-stable
Can be used for long-term lubrication of motor vehicles, industrial, construction and agricultural machinery, prevents fretting corrosion in bearings and sliding points under conditions of load, moisture and vibration. The product can be used over a wide temperature range.
- water-resistant
- flex stability
- adhesive
- pressure-absorbent
- corrosion protection
Can be used as a lubricating grease for universal use, in industry and in the automotive sector. The grease is suitable for most applications. It is used as a sliding and rolling bearing grease at grease lubrication points.
- Flex stability
- Wear protection
- Corrosion protection
Can be used for the lubrication of bearings subject to extreme pressure and shock loads, with relatively slow sliding movements.
- Friction-reducing properties
- Emergency running properties
- High compressive load
Can be used for the lubrication of bearings subject to extreme pressure and shock loads, with relatively slow sliding movements.
- Friction-reducing properties
- Emergency running properties
- High compressive load
EP-M 1 (NLGI 1)
Can also be used to lubricate open lubrication points in the visible area on guide rails, plastic sliding plates on telescopic cranes as well as on sliding roofs and slide rails in the heavy to medium load range. It has also proved its worth as external protection for wire ropes.
- High pressure absorption capacity
- Adhesion
- Corrosion protection
- Fulling resistance
- Emergency running properties
Can be used for the lubrication of highly pressurised rolling and plain bearings at high bearing temperatures and high external temperature and moisture loads. The product has proven itself not only in foundries and continuous casting plants, but also when used in mobile and stationary centralised lubrication systems
- Walk-stable
- oxidation-resistant
- water-resistant
- good corrosion properties
- high thermal resistance
- high pressure absorption capacity
- good adhesion
Lincoln Series 200 and QLS progressive distributors
Can be used for the lubrication of highly loaded roller and plain bearings at increased bearing temperatures. It is particularly recommended for the lubrication of wheel bearings in commercial vehicles and for high-speed car wheel bearings.
- High thermal load capacity
- Resistant to walking
- Resistant to oxidation
- Water-resistant
- Good corrosion properties
- High pressure absorption capacity
- Good adhesion
MAN 284 Li-H 2; MB 265.1
LC 003 (NLGI 3)
Can be used in rolling bearings subject to high loads and particularly high thermal loads, especially where lifetime lubrication is required.
- Ageing-resistant
- corrosion protection
- wear-inhibiting
- compatible with plastics
- long relubrication intervals
- free from heavy metals
Can be used for the lubrication of roller bearings, electric motors and machine tools, as well as in wheel hubs of cars, lorries, etc.
Corrosion protection
- Ageing resistance
- Wear protection
- Adhesion
MB 267.0; MAN 283 Li-P 3
L 221 (NLGI 1); L 223 (NLGI 3)
Can be used in open and closed gearboxes. Particularly suitable for geared motors, drum motors, small gears on household machines, angle grinders and drills.
- stable
- adhesive
- high pressure additives
- pressure absorbing
- wear resistance
- corrosion protection
GLP 0 F (NLGI 0)
Can be used at all lubrication points that are supplied by centralised lubrication systems for commercial vehicles.
- Rust and oxidation protection
- adhesive
- pressure-absorbent
MB 264.0; MAN 283 Li-P 00/000; VOGEL/SKF Lubrication Systems
GLP 0 KHT (NLGI 0)
Universally applicable in various industrial applications. The grease is tried and tested in many applications with centralised lubrication systems and gearbox applications.
- Rust and oxidation protection
- Adhesion
- Wear protection
- Pressure-absorbent
Can be used as a long-term lubricant in a wide temperature range for plain and roller bearings in rollers of circular conveyor systems, painting and baking ovens, waffle baking machines, etc., for use in plastics production and the automotive industry
- Silicone-free
- Optimum lubricating properties
- Reduced downtime and maintenance costs
Suitable for plain and roller bearings in rollers of circular conveyor systems, painting and curing ovens, etc., for use in plastics production and the automotive industry
- Oxidation stability
- high dropping point
- corrosion protection
Can be used to lubricate roller bearings in the rollers of pellet presses. Due to high loads, a lubricating grease is required that can cope with both high loads and high temperatures.
- resilient
- constant temperature
- extended service life
Salmatec
Can be used to lubricate rolling bearings that are supplied via a centralised lubrication system. It is used, among other things, for water-cooled rolling bearings in hot rolling mills where high loads and high temperatures occur.
- ageing-resistant
- thermal load capacity
- stable to walking
- oxidation-resistant
- water-resistant
- corrosion protection
- pressure-absorbent
- adhesion
Can be used in insertion tools and wear bushes of hydraulic and pneumatic hammers.
- Pressure-absorbing
- Corrosion protection
- Water-resistant
- Wear-reducing
- Oxidation-resistant
Can be used at temperatures of -50°C. It ensures the safe use of precision mechanical drives and small actuators. Temperatures above 140°C should not be exceeded.
- exceptionally good low-temperature suitability
- load-bearing capacity
- low coefficient of friction
- high speed
Can be used on components that are exposed to high temperatures, high pressures and corrosive influences. For example, in devices that require exceptional oxidation stability and corrosion protection even at high temperatures, in all moving parts with high wear, in the chemical industry, stone and earth industry and in the automotive sector.
- Friction reduction
- Wear reduction
- Fretting corrosion protection
- Corrosion protection
Can be used on components that are exposed to high temperatures, high pressures and corrosive influences. For example in the automotive, chemical and construction industries.
- Friction reduction
- Wear reduction
- Fretting corrosion protection
- Corrosion protection
Applications include the lubrication of highly loaded plain and roller bearings in construction, earthmoving, commercial vehicles and mining machinery. Developed for demanding industrial applications in challenging environments, it offers protection against wear under heavy loads, high temperatures and in wet environments.
- water-resistant
- flex stability
- adhesive
- pressure-absorbent
- corrosion protection
Wherever there is a risk of hydraulic fluids leaking into the groundwater or wastewater. This includes technical equipment operating in water purification and water protection areas or in the vicinity of surface waters.
- Readily biodegradable
- Zinc-free additive combination
- Resistant to low temperatures
- Oxidation stability
- Corrosion and EP protection
US EPA VGP:2013, SP Technical Research Institute, Sweden (Swedish Standard 15 54 34)
ISO VG 15; 22; 32; 68
Wherever there is a risk of hydraulic fluids leaking into the groundwater or wastewater. This includes technical equipment operating in water purification and water protection areas or in the vicinity of surface waters.
- readily biodegradable
- high-performance and environmentally friendly additive combination
- resistant to low temperatures
- corrosion and EP protection
- high temperature oxidation stability
German Armed Forces / NATO: TL 9150-0083; SP Technical Research Institute, Sweden (Swedish Standard 155434)
ISO VG 22; 32; 68
Wherever there is a risk of hydraulic fluids leaking into the groundwater or wastewater. This includes technical equipment operating in water purification and water protection areas or in the vicinity of surface waters.
- readily biodegradable
- high-performance and environmentally friendly additive combination
- resistant to low temperatures
- corrosion and EP protection
- high temperature oxidation stability
ISO VG 32; 68
Use in high fire hazard areas. It is also recommended for use in areas with increased environmental hazards
, for example steelworks, forges, mining areas -> underground mining.
- readily biodegradable
- high-performance and environmentally friendly additive combination
- resistant to low temperatures
- corrosion and EP protection
- high-temperature oxidation stability
- anhydrous
- flame retardant
FM - Factory Mutual
Can be used as a gear oil in environmentally sensitive areas where many oil changes take place. The oil offers excellent protection against wear and greying, very good wear protection as well as load absorption properties and demulsibility.
US EPA VGP 2013
ISO VG 68; 220; 150; 320; 460; 680
Can be used, among other things, in the production of precast concrete parts and exposed concrete with non-absorbent and absorbent formwork. Apply evenly with commercially available spraying equipment, in the case of non-absorbent formwork in a thin, even film. For horizontal moulds, rub the release agent in with a cloth.
- Rapidly biodegradable release agent
- Easier removal of formwork components
High-performance long-life multi-purpose grease. Suitable for all lubrication points on mobile and stationary systems in sensitive areas where ground contact or contact with water cannot be avoided.
- biodegradable
- non-toxic
- strong adhesion to metal surfaces
- high corrosion and wear protection
- application temperature up to 140°C
US EPA VGP:2013
320-0 G (NLGI 0)
Can be used in environmentally sensitive areas for the lubrication of chains, drive chains and saw chains of stone saws.
- Biodegradable
- good adhesion
- water-repellent
- anti-corrosive
Lithium; synthetic esters; NLGI 00, ISO-L-X-DCEB00
Can be used for insertion tools and wear bushes of hydraulic and pneumatic hammers and where the lubricant can get into the environment. The solid lubricants achieve a high load-bearing capacity and separation performance. When used regularly, our grease provides optimum protection for wear points.
- Rapidly biodegradable
- high pressure absorption capacity
- good release effect
- good corrosion protection
- good water resistance
Lithium; synthetic esters; NLGI 3; KPFE 3 K-30; ISO L-X-CCEB3
Can be used to lubricate wheel flanges on railway tracks. The grease reduces friction and wear. Due to its good adhesion and very good wear protection, it can also be used for fifth wheel couplings.
- readily biodegradable
- very good adhesion
- excellent corrosion protection behaviour
- good water resistance
Lithium; synthetic esters; NLGI 2; KPFE 2 K-30; ISO-L-X-CCIB2
RFI DPR SP SE 01 10 (Italian railway)
Can be used in the production of steel wire ropes to ensure internal rope lubrication and corrosion protection. It can also be used for external rope preservation in the factory. The wax can be used at a bath temperature between 80°C - 100°C. The maximum temperature is 120°C.
- Biodegradable
- Good adhesion
- High pressure resistant
Wax; synthetic esters
Vessel General Permit 2013
Can be used in sensitive environmental areas where contact with water and soil cannot be avoided and at all lubrication points of mobile and stationary systems. The grease is particularly suitable for use on construction machinery that is used in demanding conditions.
- biodegradable
- non-toxic
- strong adhesion
- carbon dioxide purified from industrial waste gases used for production
Calcium sulphonate complex; synthetic esters; NLGI 2
Can be used to ensure trouble-free operation. A strongly adhesive lubricating film is created even at low doses. Lubrication is also guaranteed at changing temperatures.
- Biodegradable
- strongly adhesive
Calcium sulphonate complex; synthetic esters
Can be used in insertion tools and wear bushes of hydraulic and pneumatic hammers. Regular use provides optimum protection for wear points. The grease is particularly recommended where mobile systems are lubricated and the lubricant can get into the environment.
- Biodegradable
- high pressure absorption capacity
- separating effect
- corrosion protection
- water-resistant
KAJO GmbH is a leading provider of high-quality industrial lubricants designed for a wide range of technical applications in mechanical engineering, manufacturing, and maintenance. Whether for hydraulic systems, gearboxes, compressors, or chains – KAJO offers customized lubrication solutions that combine efficiency, durability, and environmental responsibility. Through continuous research and development, KAJO ensures its products perform reliably even under extreme conditions, meeting the latest industrial standards. In doing so, KAJO GmbH supports industrial operations worldwide in optimizing performance and minimizing downtime.
